Linux version 2.6.10-1.12_FC2smp (bhcompile@bugs.build.redhat.com) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 SMP Wed Feb 2 01:45:04 EST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fffe000 (usable) BIOS-e820: 000000001fffe000 - 0000000020000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. found SMP MP-table at 000fe710 On node 0 totalpages: 131070 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126974 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. Using APIC driver default ACPI: RSDP (v000 DELL ) @ 0x000fdc40 ACPI: RSDT (v001 DELL PE2450 0x00000002 MSFT 0x0100000a) @ 0x000fdc54 ACPI: FADT (v001 DELL PE2450 0x00000002 MSFT 0x0100000a) @ 0x000fdc84 ACPI: MADT (v001 DELL PE2450 0x00000002 MSFT 0x0100000a) @ 0x000fdcf8 ACPI: SPCR (v001 DELL PE2450 0x00000002 MSFT 0x0100000a) @ 0x000fdd58 ACPI: DSDT (v001 DELL PE2450 0x00000002 MSFT 0x0100000a) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:8 APIC version 17 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 17 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15 ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16]) IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, GSI 16-31 ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 2 I/O APICs Using ACPI (MADT) for SMP configuration information Built 1 zonelists Kernel command line: ro root=LABEL=/ mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) mapped IOAPIC to ffffb000 (fec01000) Initializing CPU#0 CPU 0 irqstacks, hard=c03d2000 soft=c03b2000 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 927.725 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 513888k/524280k available (1790k kernel code, 9772k reserved, 736k data, 208k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1843.20 BogoMIPS (lpj=921600) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel Pentium III (Coppermine) stepping 03 per-CPU timeslice cutoff: 731.20 usecs. task migration cache decay timeout: 1 msecs. Booting processor 1/0 eip 3000 CPU 1 irqstacks, hard=c03d3000 soft=c03b3000 Initializing CPU#1 Calibrating delay loop... 1851.39 BogoMIPS (lpj=925696) CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Pentium III (Coppermine) stepping 03 Total of 2 processors activated (3694.59 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=0 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 348k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfc73e, last bus=3 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20041105 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Root Bridge [PCI1] (00:02) PCI: Probing PCI hardware (bus 02) ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I960._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LNKI] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LNKJ] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LNKK] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LNKL] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LNKM] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LNKN] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. ACPI: PCI Interrupt Link [LNKO] (IRQs 3 4 *5 6 7 9 10 11 12 14) ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 9 10 *11 12 14) ACPI: PCI Interrupt Link [LUSB] (IRQs 3 4 5 6 7 *10 11 12 14) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. pnp: 00:0a: ioport range 0x814-0x85b could not be reserved pnp: 00:0a: ioport range 0x580-0x58f has been reserved pnp: 00:0a: ioport range 0xc00-0xcd7 has been reserved pnp: 00:0a: ioport range 0xf50-0xf58 has been reserved apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1108156397.323:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 5C55E14F33E392D - User ID: Red Hat, Inc. (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Maximum main memory to use for agp memory: 439M agpgart: unable to determine aperture size. agpgart: agp_backend_initialize() failed. agpgart-serverworks: probe of 0000:00:00.0 failed with error -22 agpgart: Maximum main memory to use for agp memory: 439M agpgart: unable to determine aperture size. agpgart: agp_backend_initialize() failed. agpgart-serverworks: probe of 0000:00:00.1 failed with error -22 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SvrWks OSB4: IDE controller at PCI slot 0000:00:0f.1 SvrWks OSB4: chipset revision 0 SvrWks OSB4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x08b0-0x08b7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x08b8-0x08bf, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: TEAC CD-ROM CD-224E, ATAPI CD/DVD-ROM drive elevator: using anticipatory as default io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... ide1: Wait for ready failed before probe ! Probing IDE interface ide1... ide1: Wait for ready failed before probe ! hda: ATAPI 24X CD-ROM drive, 128kB Cache, (U)DMA Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: PS/2 Generic Mouse on isa0060/serio1 md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 16384 bind 21845) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI wakeup devices: PCI0 DRAC PCI1 ACPI: (supports S0 S4 S5) CPU0: domain 0: span 00000001 groups: 00000001 domain 1: span 00000003 groups: 00000001 00000002 CPU1: domain 0: span 00000002 groups: 00000002 domain 1: span 00000003 groups: 00000002 00000001 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). SCSI subsystem initialized ACPI: PCI interrupt 0000:03:04.0[A] -> GSI 31 (level, low) -> IRQ 177 ACPI: PCI interrupt 0000:03:04.1[B] -> GSI 30 (level, low) -> IRQ 185 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs ACPI: PCI interrupt 0000:00:04.1[A] -> GSI 17 (level, low) -> IRQ 193 PCI: Setting latency timer of device 0000:00:04.1 to 64 megaraid: found 0x8086:0x1960:bus 0:slot 4:func 1 scsi2:Found MegaRAID controller at 0xe081a000, IRQ:193 megaraid: [1.06:1p00] detected 1 logical drives. megaraid: channel[0] is raid. megaraid: channel[1] is raid. scsi2 : LSI Logic MegaRAID 1.06 254 commands 16 targs 5 chans 7 luns scsi2: scanning scsi channel 0 for logical drives. Vendor: MegaRAID Model: LD0 RAID5 34556R Rev: 1.06 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sda: 70770688 512-byte hdwr sectors (36235 MB) sda: asking for cache data failed sda: assuming drive cache: write through SCSI device sda: 70770688 512-byte hdwr sectors (36235 MB) sda: asking for cache data failed sda: assuming drive cache: write through sda: sda1 sda2 sda3 Attached scsi disk sda at scsi2, channel 0, id 0, lun 0 scsi2: scanning scsi channel 4 [P0] for physical devices. Vendor: DELL Model: 1x4 U2W SCSI BP Rev: 1.16 Type: Processor ANSI SCSI revision: 02 scsi2: scanning scsi channel 5 [P1] for physical devices. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 208k freed SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks ACPI: Power Button (FF) [PWRF] ibm_acpi: ec object not found ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [LUSB] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:0f.2[A] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:0f.2: OHCI Host Controller ohci_hcd 0000:00:0f.2: irq 10, pci mem 0xfe000000 ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected EXT3 FS on sda3, internal journal device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@redhat.com